Miniature Box Mimics Instructions

Miniature Box Mimic Assembly Instructions

·        Use PVA Glue (Elmer’s paper glue) to assemble the box. The more glue you use, the stronger the box will be. If you have clamps, go grab um. Clean up drips with q-tip.

·        All smooth surfaces should point outward from the box except the bottom. Put that facing up.

·        Long walls have a groove for the Window holder. They should be on the same side as the floor grooves. (Orange Arrow)

·        The mimic face has a tongue that should be on the bottom of the box. (Green Arrow)

·        When gluing the plexiglass holders, insert the plexiglass before the glue dries. This will prevent glue globs from drying and preventing the plexiglass from fitting the groove. (Red Arrow)

·        Glue the small tab pieces (should be 12 of them) into the edge rails first, let those dry, then glue rail assembly to the top of the box. (Blue Arrows)

·        Any problems or questions, please email contact@tntlaserworks.com

·        Enjoy!